HIGH POWER® HPC-430L12S

Connectors Summary | Physical Dimensions | Cable's Length

Specification

430 Watts peak output.

		Works with Intel Pentium 4 systems
		Works with any Pentium III processor based system.
		Works with any Celeron processor based system.

		Recommended for Athlon^TM XP systems.
		Recommended for Athlon^TM/Thunderbird systems.
		Recommended for Duron^TM systems.

Automatic fan speed control (AFC) with built-in temperature sensor.

AC Input (115v/ 230v switchable):

115V @ 60 Hz - 9A max, or
230V @ 50Hz - 5A max

Output Voltage	Load Range MAX	Regulation	Ripple Peak-to-Peak Max.
1. +5V	20.0A	+5% ~ -5%	50 mV
2. +12V1	18.0A	+5% ~ -5%	200 mV
3. +12V2	18.0A	+5% ~ -5%	200 mV
4. -12V	0.8A	+10% ~ -10%	200 mV
5. +5VSB	2.0A	+5% ~ -5%	100 mV
6. +3.3V	20.0A	+5% ~ -5%	100 mV

12V1 & 12V2 combined maximum power output is 300-Watts
5V & 3.3V combined maximum power output is 130-Watts

MTBF Life Expectancy of this model:

100,000 hours* (11 years & 2 months)

*exclude the life of the fan which is affected by environment.

Operating temperature range:

10^oC - 50^oC (50^oF - 122^oF)

Efficiency: 65 % minimum when measured at full load

High standard of quality with FCC, UL, cUL, CE, and C-TICK Certification.

Lead-FREE
Cadium-FREE
Mercury-FREE
Hexavalent chromium-FREE
PBB-FREE
PBDE flame retardants-FREE

RoHS Compliant - made with hazardous-free components
RoHS is the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment. This has been a standard in Europe and is now becoming a standard in the world. Not only lead, but cadium, mercury, hexavalent chromium, polybrominated biphenyl (PBB), and polybrominated diphenyl ether (PBDE) flame retardants are limited as well.

Protection:

Input Protection

In primary circuit of the power supply , a protected fuse is inserted. Only internal fault of the power supply will cause the fuse to be blown.

Output Protection

Over Voltage Protection: The +5V/+12V/+3.3V DC outputs are protected against the over voltage condition . Maximum value can't be over 6.8V at 5V terminal ,15.6V at 12V and 4.5V at 3.3V.

Over Power Protection: As a protection against excessive power delivery due to output short circuit or over load usage, this power supply can electronically limit the output current to not surged to exceed 60% of its designed output power.
Short Circuit Protection: Short circuit placed on any DC output will shut down all DC outputs and latch. After that, the unit may need to be removed from system or unused for some time before it can be used again.

Over Current Protection: Current protection is designed to limit the current to ensure the system operate within safe operating conditions. The recommended over current protection scheme is for the power supply to latch into the shutdown state. After that, the unit may need to be removed from system or unused for some time before it can be used again. The setting of over current protection for each output rail is as following: +5V is less than or equal to 50A , +3.3V is less than or equal to 60A,+12V is less than or equal to 40A.

Connectors Summary

Connector Name	Quantity	Picture
20pin & 24pin dual-use main connector (fixed 24pin version optional)	1	click to supersize
Peripheral Power Connector	3
Floppy Drive Power Connector	1

Connector Name	Quantity	Picture
Serial ATA Power Connector (90-degree type to fit in tight corner)	4
4-pin ATX12V Power Connector	1
PCI-Express Power Connector (for PCI-EXPRESS video card)	1