Supports all ATX 2.01 & ATX 2.03 systems

Home > Product > Power Supplies > HPC-300-101 (Discontinued)

300 Watts output.
Recommended for XP/Athlon/Thunderbird/Duron.
Automatic Fan Speed Control (A.F.C.).
Built-in Triple Protection.




In-Stock Upgrade Model Options:
SI-A400M2 (Mechanically similar and PCI-Expree support)
or HPC-360-202 (if 6-pin Aux Power Connector is required)


Specification | Connectors Summary | Close-up Pictures | Cable's Length


Specification



Works with any Pentium III processor based system.
Works with any Celeron processor based system.
Recommended for AthlonTM XP systems.
Recommended for AthlonTM/Thunderbird systems.
Recommended for DuronTM systems.
  • Built-in Triple Protection:
    • Over Voltage Protection,
    • Over Power Protection, 
    • Short Circuit Protection. 
  • Automatic fan speed control (AFC) with built-in temperature sensor. The power supply fan speed is regulated in reference to its internal temperature sensor.  The low friction fan turns slowly at low temperatures, reducing power consumption and greatly reducing fan noise. Conversely, the fan is allowed to spin up its speed in response to temperature increase.  The fan speed ranges roughly from 1200 RPM to a full speed of 3000 RPM. 

    The AFC feature, in general, extends fan life, cuts down energy consumption, and reduce the chance of over-heating.   AFC is one step above the basic low friction "Noise Killer" fan deployment..




 
Output
Voltage
Load Range
MAX
Regulation Ripple
Peak-to-Peak
Max.
1. +5V 25.0A +5% ~ -5% 50 mV
2. +12V 13.0A +5% ~ -5% 120 mV
3. -5V 0.3A +10% ~ -10% 50 mV
4. -12V 0.8A +10% ~ -10% 120 mV
5. +5Vs 2.0A +5% ~ -5% 50 mV
6. +3.3V 20.0A +5% ~ -5% 50 mV
*+5V +3.3V combined output should not exceed 180W
 

MTBF Life Expectancy of this model:
100,000 hours* (11 years & 2 months)

Operating temperature range:
10oC - 50oC (50oF - 122oF)

High standard of quality with FCC, UL, CSA, CE, TUV, SEMKO, NEMKO, FIMKO, DEMKO, and CB certification.


 
 




Connectors Summary


Connector NameQuantityPicture
20-pin Standard ATX connector1
Peripheral Power Connector4
Connector NameQuantityPicture
Floppy Drive Power Connector2
6-pin Aux Power Connector1


Close-up Pictures

click to enlarge


click to enlarge



1. Heat from system.
2. Heat absorb by power supply.
3. Air flow also reduce the heat generated by power supply.
4. Fan sucks the hot air from power supply.
5. Fan blows out the heat.


Cable's Length

1X 20-pin Standard ATX connector to fit any ATX mainboard.
2X Peripheral Power Connector.
1X Floppy Drive Power Connector.
2X Peripheral Power Connector.
1X Floppy Drive Power Connector.
1X 6-pin Aux Power Connector.




In-Stock Upgrade Model Options:
SI-A400M2 (Mechanically similar and PCI-Expree support)
or HPC-360-202 (if 6-pin Aux Power Connector is required)



This web site is powered by
100% wind energy






HIGH POWER®  is a nVIDIA® SLITM Certified Partner






         Copyright © 2003-2010 HIGH POWER® All rights reserved.