Home > Product > Power Supplies > SI-C200P2 PFC    (discontinued)

200 Watts output.
Passed Intel Pentium 4 power supply testing.
Recommended by AMD for Athlon/Thunderbird/Duron.
Automatic fan speed control (AFC).
Built-in Triple Protection.

Specification | Close-up Pictures | Cables & Connectors


Passed Intel's Pentium 4 power supply qualification tests.
Recommend by AMD for AthlonTM/Thunderbird systems up to 1.1Ghz.
Recommend by AMD for DuronTM systems up to 1.1Ghz.
Works with any Pentium III processor based system.
Works with any Celeron processor based system.
  • 6-pin Aux connector and 4-pin ATX12V connector for Pentium 4 system. 
  • Fan speed monitor connector (standard 3-pin) to report power supply fan's RPM in real time to the motherboard. 
  • Built-in Triple Protection:
    • Over Voltage Protection,
    • Over Power Protection, 
    • Short Circuit Protection. 

Load Range
Regulation Ripple
1. +5V 20.0A +5% ~ -5% 80 mV
2. +12V 8.0A +5% ~ -5% 120 mV
3. -5V 0.3A +10% ~ -10% 150 mV
4. -12V 0.5A +10% ~ -10% 150 mV
5. +5Vs 1.5A +5% ~ -5% 80 mV
6. +3.3V 14.0A +5% ~ -5% 80 mV
*+5V +3.3V combined output should not exceed 110W

MTBF Life Expectancy of this model:
100,000 hours* (11 years & 2 months)

Operating temperature range:
10oC - 50oC (50oF - 122oF)

Download Full Specification
Download Mechanical Drawing
Download Adobe Acrobat Reader 4.0

* Excludes the life of the fan
Close-up Pictures

Cables & Connectors

1X 20-pin Standard ATX connector to fit any ATX mainboard.
2X Peripheral Power Connector.
1X Floppy Drive Power Connector.
2X Peripheral Power Connector.
1X Floppy Drive Power Connector.
1X 6-pin Aux Power Connector.
1X 4-pin ATX12V Power Connector.
1X 3-pin Fan Speed Monitor.

Connector Name Quantity Picture
20-pin Standard ATX connector 1
Peripheral Power Connector 4
Floppy Drive Power Connector 2
Connector Name Quantity Picture
6-pin Aux Power Connector 1
4-pin ATX12V Power Connector 1
3-pin Fan Speed Monitor 1

3-pin Fan Speed Monitor
Fan Speed Monitor connector* (3-pin) providing real time rotational speed of the power supply fan to the system.        Most motherboard has at least one extra 3-pin fan connector in addition to the standard CPU fan connector.  

turbo mode: Insertion of this connector to the motherboard automatically kicks the power supply fan to high speed. 

4-pin ATX12V Power Connector

Used only in Intel Pentium 4 system.  If you do not have an Intel Pentium 4 system, you can just leave this connector alone.

6-pin Aux Power Connector

Availablibility of this connector indicates support for ATX2.03 & server motherboards.  If your motherboard does not have a place for this connector to plug in, then it is ok to leave it alone. 

SI-A250M2 250Watt Upgrade Model Available

This web site is powered by
100% wind energy

HIGH POWER  is committed to quality & longevity

         Copyright 2003-2016 HIGH POWER All rights reserved.