Supports all ATX 2.01, ATX 2.03 & Intel P4 (12V) systems
Home > Product > Power Supplies > Models: HPC-560-A12C

NEW!  560W Extreme Edition Power Supply


Comprehensive support for
ATX, BTX, and EPS12V form factors electrically and mechanically
NVIDIA® SLITM Ready
ATITM Crossfire Ready
Support Intel Xeon, Pentium D, Extreme Edition, Core 2 Quad, Core 2 Duo, Core 2 Extreme, Quad Core, and AMD 64 X2 based systems
  • ACTIVE PFC for reduced harmonic distortion
  • Full range AC input with automatic AC input voltage selection
  • Intel ATX 12V V2.2
  • Triple +12V Output Rails - Three independent + 12V output rails ensure safe and stable operation under heavy operation.
  • All new complete 6*Startm protection system:

        * Over Voltage Protection
        * Under Voltage Protection
        * Over Current Protection
        * Over Temperature Protection
        * Short Circuit Protection
        * Over Power Protection
  • All cables are modular detachable and come pre-sleeved
  • Gold coated terminal connectors


Patented EZ-Extract (squeeze-and-pull) Peripheral Power Connectors
No longer must you fight and hurt your fingers to pull out a peripheral power connector from a hard drive or CD ROM drive.  With this patented EZ-Extract connectors, all you have to do is to squeeze the connector shields as pictured.  And then the shield will in turn help push the connector out of the drive socket.
  • Dimensions: 150(W) x 86(H) x 140(D) mm

  • Built-in wattage meter (Patented): 
System power consumption at one glance !

click on picture to enlarge

  • Low Noise Fan with Anti-Vibration Pad included - Large quiet 12cm with twin ball bearing fan for an ultimate balance of low noise and vital reliability.
  • Advanced Double Forward circuit design and double-layer PCB manufacturing with flush  mount SMT components.  The result is a high efficency (over 80%)  power supply with improved reliablity - reduce heat, save energy, and last longer.




  • All cables are modular detachable and come pre-sleeved
  • Gold coated terminal connectors




 RoHS Compliant - made with hazardous-free components
 RoHS is the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment. This has been a standard in Europe and is now becoming a standard in the world. Not only lead, but cadium, mercury, hexavalent chromium, polybrominated biphenyl (PBB), and polybrominated diphenyl ether (PBDE) flame retardants are limited as well.



Built-in Real-Time Wattage Meter (Patented):
Patented built-in real-time wattage meter eliminates the power supply wattage requirement guesswork.  User can now visualize how much wattage power is available for adding more cards or drives.
 
System power consumption at one glance !


This meter takes out the fear of overloading your power supply when you are in need of installing additional devices to your system.    For example, if the maximum system power consumption is shown to be 150w, then you would have additional 350w of reserve power to accomodate additional video cards or drives.
People currently buy higher wattage power supply than they need because: We just don't know how much wattage our systems need exactly from a power supply.  A lot of power supplies in the market are over-rated in wattage claim that users feel that they never seem to get a powerful enough power supply.

System Administrators, Technicians, Engineers, and PC builders:
No more guess work on how strong of a power supply you would need for any system.   You can use this unit to gauge the maximum system wattage requirement first, then install an appropriate lower cost lower wattage power supply for the system.  You no longer have to over-supply each and every system. 

Disclaimer: We recommend using a lower cost HIGH POWER® models in this method of appropriating the right power supply wattage for each system as all models from HIGH POWER® are accurately rated.  Use of many cheap over-rated power supply models that are currently flooding the market may return disappointing result. 



The Retail Package:



ELECTRICAL SPECIFICATIONS

INPUT  
Input range: 110/230 Vac
Frequency: 50-60 Hz
Input current: 10.0A / 5.0A
EMI/RFI: FCC Part 15 Class B & CISPR 22 Class B

OUTPUT		  
Maximum power: Max.560 Watts
Hold up- time: >16ms at full load at 115Vac
Over Voltage Protection: +3.3 V : < 4.3 V
+5 V : < 7.0 V
+12V : < 15.6 V
Short circuit protection: Latch off
Power good signal: TTL compatible. Signal goes high 100-500ms
Signal goes low at least 1ms before main O/P.

ENVIRONMENTAL		  


Operating temperature: 10°C to 50°C
Storage temperature: -40°C to 70°C
Cooling: Self contained fan with speed control in regard to O/P load or ambient Temp.
MTBF: > 100,000 hours at 75% load and 25°C ambient conditions

 

OUTPUT SPECIFICATION
Output voltage
MIN. Load
MAX. Load
Regulation
Peak-to-Peak Max.
+5V
0.5A
30.0A
+5% ~ -5%
70mV
+12V1
1.0A
14.0A
+5% ~ -5%
120mV
+12V2
1.0A
23.0A
+5% ~ -5%
120mV
+12V3
1.0A
15.0A
+5% ~ -5%
120mV
- 12V
0.0A
0.5A
+10% ~ -10%
150mV
+5Vs
0.1A
2.5A
+5% ~ -5%
70mV
+3.3V
0.8A
24.0A
+5% ~ -5%
70mV
* Maximum continuous combined load on +3.3VDC and +5VDC outputs shall not exceed 180W.
* Maximum combined load on 12V1+12V2+12V3 outputs shall not exceed 440W.
* Maximum combined load on 12V1+12V3 outputs shall not exceed 300W.

Standard ATX Main Connector Pin-Out

Pin Signal Wire Color Pin Signal Wire Color
1 +3.3V Orange 13 +3.3V
 		Orange
2 +3.3V Orange 14 -12V Blue
3 COM (GND) Black 15 COM (GND) Black
4 +5V Red 16 Power On Green
5 COM (GND) Black 17 COM (GND) Black
6 +5V Red 18 COM (GND) Black
7 COM (GND) Black 19 COM (GND) Black
8 Power Good Gray 20 N/C
N/C
9 +5 V Standby Purple 21 +5V Red
10 +12V1 Yellow 22 +5V Red
11 +12V1 Yellow 23 +5V Red
12 +3.3V Orange 24 COM (GND) Black

 S-ATA Power Connector Pin-Out

Pin Signal Wire Color
1 +3.3V Orange
2 COM (GND) Black
3 +5V Red
4 COM (GND) Black
5 +12V2 Yellow

 Peripheral Connector (a.k.a. Big 4pin) Pin-Out

Pin Signal Wire Color
1 +12V3 Yellow
2 COM (GND) Black
3 COM (GND) Black
4 +5V Red

Floppy Connector Pin-Out

Pin Signal Wire Color
1 +12V3 Yellow
2 COM (GND) Black
3 COM (GND) Black
4 +5V Red

PCI-Express Connector PP Pin-Out

Pin Signal Wire Color
1 +12V1 Yellow
2 +12V1 Yellow
3 +12V1 Yellow
4 COM (GND)
 Black
5 COM (GND) Black
6
 COM (GND) Black

PCI-Express Connector PQ Pin-Out

Pin Signal Wire Color
1 +12V2 Yellow
2 +12V2 Yellow
3 +12V2 Yellow
4 COM (GND)
 Black
5 COM (GND) Black
6
 COM (GND) Black









Retail package includes
  1. HPC-560-A12C power supply with integrated real-time digital wattage meter.
  2. UL approved 3-prong safety power cord.
  3. Installation screws
  4. Anti-vibration pad
  5. Modular sleeved cable set.




HIGH POWER®  is a NVIDIA® SLITM Certified Partner


Copyright © 2005-2008 HIGH POWER® All rights reserved.