Home > Product > Power Supplies > AC/DC Adapter > HPA-601250U3  REV: A36

 




  Box design may differ from picture above
   HIGH POWER®

60W Energy-efficient Fanless LCD Monitor / TV AC Adapter /
Mini ITX 12V PC Power Supply

  • Input: 100-240V AC
  • Input AC Inlet: IEC 320 3pin (Type C14) compatible
  • Output Voltage: 12V DC
  • Ratings: 5A (60W) Continuous, 70W Peak
  • DC Jack Dimensions: 5.5mm (outer) / 2.5mm (inner) / 10mm (length)
  • 88% High efficiency design: under normal line input and average of 25%, 50%, 75%, 100% of max load
  • Meet DOE CEC level VI
  • No load Power Consumption :  Less then 0.21W
  • Fanless AC adapter operates in total silence.
  • UL, cUL, TUV, CE, FCC, CCC, KC, GS, CB, DOE VI, cTick, SAA Certified
  • RoHS Compliant
  • DC Cable length - 120cm including ferrite bead. 
  • DC Cable construction: 18AWG UL1185 in coaxial braiding to reduce ripple & improve voltage stability
Technical Specifications

  • AC Input Voltage
     Maximum Voltage: 264Vac
     Normal Voltage : 100~240Vac
     Minimum Voltage: 90Vac
  • AC Input Frequency
    Maximum Frequency: 63Hz
     Normal Frequency: 50~60Hz
    Minimum Frequency: 47Hz
  • Input Current:
     1.2A (Max.) @ 115Vac input will full load
     0.6A (Max.) @ 230Vac input will full load
  • DC Output Power: 5A (60W) Continuous, 70W Peak
  • 88% High efficiency design: under normal line input and average of 25%, 50%, 75%, 100% of max load.  Minimum efficiency of 89% under 25% load.
  • Meet CEC level VI
  • No load Power Consumption :  Less then 0.21W
  • Inrush Current (cold start) : 30A Max. @110Vac/60Hz;   60A Max. @230Vac/50Hz
  • AC Leakage Current: 0.25mA Max. @240VAC input.
  • Line Regulation: This line regulation is less than ± 5%, of rated output voltage@ full load
  • Minimum Load: 0.0A
  • Hold Up Time: ≧ 5mSec., @ 115V AC input line, with full load.
  • Rise Time: ≦40 milli-second @ 115V AC input with full load - from 10% to 90% of output voltage.
  • Turn on Delay Time: The output voltage should rise to 90% of rated output voltage in less than 3 second from 115V AC applied to start up.

  • Over voltage protection

  • Short circuit protection

  • Over Voltage Protection

  • 100% HI-POT tested: IEC 320 3pin primary to secondary 1800Vac 5mA 1min

  • 100% cycling BURN-IN under 80% load for 2 hours

  • 12V DC output @  +- 5% Standard Deviation

  • 120mV Maximum Ripple Voltage

  • Operating temperature:  0 - 40 degree C

  • Storage temperature: -20 - 80 degree C

  • Humidity : Operating -  10 to 90 %;  Storage - 5 to 90 %
  • Altitude :  Operating - From sea level to 2,000-Meter ; Storage - 5,000-Meter
  • MTBF : > 50,000 hours at full load under 25 degree C ambient condition
  • Safety compliance: UL, cUL, TUV, CE, FCC, CCC, KC, GS, CB, DOE VI, cTick, SAA
  • Dimensions: 110 (L) * 45 (W) * 26 (H)  mm 

 Lead-FREE
 Cadium-FREE
 Mercury-FREE
 Hexavalent chromium-FREE
 PBB-FREE
 PBDE flame retardants-FREE		 RoHS Compliant - made with hazardous-free components

 RoHS is the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment. This has been a standard in Europe and is now becoming a standard in the world. Not only lead, but cadium, mercury, hexavalent chromium, polybrominated biphenyl (PBB), and polybrominated diphenyl ether (PBDE) flame retardants are limited as well.
 



pad


Built-in power status indicator
  • Blue LED turns steady on when there is a reliable 12V DC output.
  • LED flashes when there is a problem found by the internal detection circuitry.
  • LED turns off when there is no power output or no power input.


Standard US 3-pong AC Inlet
  • IEC 320 3pin (Type C14) compatible
  • Standard US computer 3-prong AC power cord compatible
  • Ground pin included for extra safety over 2-prong design

Case dimensions:
114mm (Length)/ 50mm (Width)/ 30mm (Height)












































  
DC cable: 18AWG, UL1185, 1200mm±50mm total in length with ferrite bead.   


  Cable construction:
Coaxial braiding to reduce ripple
and improve voltage stability







DC Jack Dimensions:
Inner diameter: 2.5mm
Outer diameter: 5.5mm
Plug length - 10.0mm.
Plug type - 180-degree








IRdrive Online Store
warranty detail

USA & Worldwide
(Fulfilled by J.D.Research, Inc.)

USD $45 
1-Year Express Replacement Advantage Warranty 
- Repair or Replace in 3-business Days -




Models Relationship

 Upgrade replacement models for these HIGH POWER® models :










HIGH POWER® HPA-601250U3 C0-A35
HIGH POWER® HPA-601250U3 C0-A34
 HIGH POWER® HPA-501242U3 C0-A4
HIGH POWER® HPA-501242U3 A-9
HIGH POWER® HPA-501242U3 C0-A9 
HIGH POWER® HPA-501242U3 C0-A11
HIGH POWER® HPA-501242U3 C0-A33
HIGH POWER® HPA-501242U3 C0-A34
HIGH POWER® HPA-501242U3 C0-A39 
HIGH POWER® HPA-401234U3 C0-A3
HIGH POWER® HPA-401234U3 C0-A4
HIGH POWER® HPA-401234U3 C0-A7
HIGH POWER® HPA-401234U3 C0-A9
HIGH POWER® HPA-401234U3 C0-A14
HIGH POWER® HPA-401234U3 C0-A15
HIGH POWER® HPA-401234U3 C0-A28










HIGH POWER®  is committed to quality & longevity



   Copyright © 2017-2022 HIGH POWER® All rights reserved.

c