HIGH POWER® HPA-601250U3 A36

Home > Product > Power Supplies > AC/DC Adapter > HPA-601250U3 C0-A42

CEC Efficiency Level: IV

HIGH POWER^® HPA-601250U3 REV: C0-A42

60W Energy-efficient Fanless AC to 12V Power Adapter

Input: 100-240 VAC +/- 10% full range
Input AC Inlet: IEC 320 3pin (Type C14) compatible with standard 3-prong computer power cord.
Output Voltage: 12V DC
Ratings: 5A (60W)
Standby idle no load power consumption is less than 0.5 Watt
High efficiency switching technology with 83% efficency
DC Cable length - 47.5" (120cm)
DC Jack Type: 6-pin (barrel version available)
High efficiency switching technology with 83% efficency at full load
Fanless AC adapter operates in total silence. Ideal power source for devices such as DVR, LCD monitor, etc.
Worldwide EMI & SAFETY APPROVAL: UL/cUL , TUV/GS, CE, FCC, CCC, BSMI, DOIR +C-TICK, GOST-R, PSE, PSB, EK

Lead-FREE
Cadium-FREE
Mercury-FREE
Hexavalent chromium-FREE
PBB-FREE
PBDE flame retardants-FREE

RoHS Compliant - made with hazardous-free components
RoHS is the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment. This has been a standard in Europe and is now becoming a standard in the world. Not only lead, but cadium, mercury, hexavalent chromium, polybrominated biphenyl (PBB), and polybrominated diphenyl ether (PBDE) flame retardants are limited as well.

Specifications:

Universal input 100-240 VAC
High efficiency switching technology -- 83% typical @ full load
Single 12V output @ 5A +- 5%
Load Regulation: +- 5% (11.4V - 12.6V)
DC Cable length - 47.5" (120cm) with UL rated 1185 AWG#18 cable
Over Current protection
Over Voltage protection
Short circuit protection
Open-Circuit Protection
100% HI-POT tested
100% cycling BURN-IN
Dimensions: 120 mm (L) * 60 mm (W) * 35mm (H)
Storage Environment:

Temperature: -20 - 85 degree C

Humidity: 5 - 90 %

Altitude: From sea level to 40,000Ft

Operating Environment:

Temperature: 0 - 40 degree C

Humidity: 10 - 90 %

Altitude: From sea level to 10,000Ft
MTBF : > 30,000 hours at 80% load and 40 degree C ambient conditions
Input Fuse Rating: T3.15A/250V
Inrush Current at cold start, maximum load:

30A at 110 VAC
60A at 220 VAC
Line Regulation: This line regulation is less than ± 1%, @ full load .
Turn-ON Time: The output voltage should rise to 90% of +12V in less than 3 seconds from AC apply to 110VAC
No load power consumption is less than 0.5 Watt @ 230VAC/ 50Hz
DC Output Ripple/Noise: 2% max
Hi-Pot Tested: 4242 VDC at 5mA for 3 second between primary and secondary circuit
Insulation Tested: 500VDC for 3 seconds between primary and secondary circuit
Worldwide EMI & SAFETY APPROVAL: UL/cUL , TUV/GS, CE, FCC, CCC, BSMI, DOIR +C-TICK, GOST-R, PSE, PSB, EK

Applications:

Security device such as LCD monitor, CCD camera, security system, and control.

Built-in power status indicator

Green LED turns steady on when there is a reliable 12V DC output.

LED flashes when there is a problem found by the internal detection circuitry.

LED turns off when there is no power output or no power input.

click on picture to enlarge

IRdrive Online Store

USA & Worldwide
(Fulfilled by J.D.Research, Inc.)

USD $25

Express Replacement Advantage Warranty
- Repair or Replace in 3-business Days -

HIGH POWER^®is committed to quality & longevity

Copyright © 2005-2025 HIGH POWER^® All rights reserved.