Supports all ATX 2.01, ATX 2.03, Intel P4 (12V), and ATX12V 2.0 Active PFC systems

Home > Product > Power Supplies > HPC-360-202 DF (Passive PFC)  -- (Discontinued)

430-Watt 120mm Fan Upgrade Available


FanM   SATA power connectors
360 Watts output (Passive PFC).
ATX 12V V2.0 - Dual 12V rails outputs.
I/O Switch for manual shut-down.
Dual High quality ball bearing Fans design. (function of 2nd fan)
Automatic Fan Speed Control (A.F.C.).
Extra long cables to support server (full) tower cases.
Fan Speed Monitor connector (3-pin).
SATA Hard Drives support.
Built-in Quad Protection.

Specification | Connectors SummaryFunction of 2nd Fan


Intel Pentium 4 Ready.
Works with any Pentium III processor based system.
Works with any Celeron processor based system.
Recommended for AthlonTM XP systems.
Recommended for AthlonTM/Thunderbird systems.
Recommended for DuronTM systems.

Load Range
Regulation Ripple
1. +5V 35.0A +5% ~ -5% 50 mV
2. +12V1 15.0A +5% ~ -5% 120 mV
3. +12V2
17.0A +5% ~ -5% 120 mV
3. -5V 0.8A +10% ~ -10% 100 mV
4. -12V 0.3A +10% ~ -10% 120 mV
5. +5VSB 2.0A +5% ~ -5% 50 mV
6. +3.3V 28.0A +5% ~ -5% 50 mV
*+5V +3.3V combined output should not exceed 220W

MTBF Life Expectancy of this model:
100,000 hours* (11 years & 2 months)

Operating temperature range:
10oC - 50oC (50oF - 122oF)

High standard of quality with FCC, UL, cUL, CE, TUV, and CB certification.


Connectors Summary

Connector Name Quantity Picture
20pin & 24pin
dual-use main connector
click to supersize
Peripheral Power Connector 6
4-pin ATX12V Power Connector 1
Connector Name Quantity Picture
Floppy Drive Power Connector 2
SATA Power Connector 2
3-pin Fan Speed Monitor


Question: What's Fan Speed Monitor?

Answer: The Fan Speed Monitor connector, when connected to an available fan port on the motherboard, provides real time rotational speed of the power supply fan to the system.  This feature provides an added level of security alarm to the system.  In the event that the power supply's fan failure, the system can now be programmed to shut down immediately or sound an alarm.  Most motherboard has at least one extra 3-pin fan connector port in addition to the standard CPU fan connector.  Fan Speed Monitor connector does not have to be connected to the motherboard in order for the power supply fan to work.  This power supply has a fan speed controller with built-in temperature sensor. 

Heat absorb by power supply and Fan blows out the heat.

The function of 2nd Fan

The 2nd fan of Power Supply will absorb the heat generated by CPU more efficiently.

The 2nd fan also serves as a backup in case of the primary fan failure.

Model Relationship:  HPC-430-N12S APFC is the 430-Watt 120mm fan active PFC upgrade model

Single fan version: HPC-360-202
Single large 120mm fan version: ATX-360-212
None-PFC silver fan guard version: HPC-360-102 DF

This web site is powered by
100% wind energy

         Copyright © 2004-2015 HIGH POWER®