Home > Product > Power Supplies > HPC-430-N12S (DF version)
This is a special optional version with more Peripheral & SATA power connectors

  For Dual-core CPU and SLI/Crossfire


Standard ATX dimensions: 150(W) x 86(H) x 140(D) mm



Intel tested and determined that this power supply meets MINIMUM electrical, mechanical fit and functional compatibility with Intel® boxed desktop boards and Intel® boxed Pentium® D or Pentium® 4 processors or Intel® Core„¢ 2 Duo Processor.


  Ultra Low Noise 

  • Meets Intel ATX12V 2.2  specification. 
  • Intel listed as recommended power supply.
  • True-Wattage Rated 430 watts with dual +12v rails
  • Dual SATA Support.
  • Flexible connector design supporting both ATX and BTX systems.  110V & 220V AC input switchable.
  • Supports the latest Dual-Core and 64 bit Intel Pentium D, Core Duo, and AMD Athlon64 X2 systems.
  • Supports SLI & Crossfire video cards.
  • Ultra low noise performance without the high cost of fanless model.
  • Honey-comb rear vent structure for improved ventilation.
  • All new complete 6*Startm system protection with built-in:
    • Over Voltage Protection
    • Under Voltage Protection
    • Over Current Protection
    • Over Temperature Protection
    • Short Circuit Protection
    • Over Power Protection
  • RoHS Compliant - made with lead-free and hazardous-free components
  • High standard of quality with FCC, UL, cUL, CE, TUV, and CB certification.
  • Rocker switch for manual shut-down
Output Power Distribution Table
    AC INPUT
    115V/230V - 60/50Hz
    DC OUTPUT
    +3.3V
    +5V
    +12V1
    +12V2
    -12V
    +5VSB
    430W
    Max
    Combined
    Watts
    28A
    28A
    14A
    16A
    0.3A
    2.5A
    430W
+5V & 3.3V combined output maximum is 150W
+12V1 & +12V2 combined output maximum is 300W




 Connector Summary (standard version comes with PCI-Express power connector)

Connector Name Quantity Picture
20pin & 24pin
dual-use main connector

1
click to supersize


EZ-Extract (squeeze-and-pull) Peripheral Power Connector



 6
click to enlarge
No longer must you fight and hurt your fingers to pull out a peripheral power connector from a hard drive or CD ROM drive.  With this patented EZ-Extract connectors, all you have to do is to squeeze the connector shields as pictured.  And then the shield will in turn help push the connector out of the drive socket.
         
Connector Name Quantity Picture

Floppy Drive Power Connector


 2

Fan Speed Monitor Connector
(when connected to the motherboard, reports power supply's fan speed RPM in real-time to the system)


 1

Serial ATA Power Connector


 		4


4-pin ATX12V Power Connector

  19 inch (482 mm)
 1



  TECHNICAL SPECIFICATIONS

 Ultra Low Noise

Efficient design generates less heat than previous generation of power supply.  The over-sized low-noise 12cm fan thus can operate at its lowest noise operating range of under 2000 RPM:

The power supply fan speed is regulated in reference to its internal temperature sensor.  Our special low-friction fan turns slowly at low temperatures, reducing power consumption and greatly reducing fan noise. Conversely, the fan is allowed to spin up its speed in response to temperature increase.

RoHS Compliant - made with hazardous-free components

 RoHS is the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment. This has been a standard in Europe and is now becoming a standard in the world. Not only lead, but cadium, mercury, hexavalent chromium, polybrominated biphenyl (PBB), and polybrominated diphenyl ether (PBDE) flame retardants are limited as well.

 
Additional Close-Up Pictures (click to enlarge)


Main Connector is sleeved





Model Relationship: HPC-430-N12S is standard version without extra power connectors.


Copyright © 2005-2010 HIGH POWER® All rights reserved.