Supports all ATX 2.01, ATX
2.03, ATX12V V1.x, ATX12V V2.0, ATX12V V2.2, BTX, and EPS systems
Home
> Product > Power
Supplies > Model: HPC-560-A12S (discontinued)
New! 550W High Efficiency Upgrade (without Power Watcher) -- Available
SLITM
Certified |
ATI Certified
|
560-Watt High-Tech Industrial-Grade Quality
Power Supply
for Servers & High End PC Systems - ACTIVE PFC Energy-Efficient
|
|
Patented Built-in Power Consumption
LED Monitor:
System power
consumption display in real-time.
|
|
click to enlarge
System Wattage Consumption Meter
displays instant power drawn to
the system in rear time
|
- 560 watts
Industrial Grade Power Supply
- Patented
built-in real-time system wattage consumption meter
- Over 80%
efficiency - Low heat / Low noise / Save energy
- Operating noise level of 20.5 dBA measured at an independent test lab
- RoHS
Compliant Lead-free - made with hazardous-free components
- Intel
ATX12V V2.2
- Triple +12V
Output Rails
- Comprehensive
support for ATX, BTX, and EPS12V form factors
- ACTIVE PFC
for reduced harmonic distortion
- Full range
AC input with automatic AC input voltage selection
- Integrated
case fan controller built-in
- All cables
come pre-sleeved
- Gold coated
terminal connectors
- Patented
EZ-Extract (squeeze-and-pull) Peripheral Power Connectors
- All new
complete 6*Startm protection system
- ATI Radeon® Crossfire Ready
- Support
Intel Xeon, Pentium D, Extreme Edition, Core 2 Quad, Core 2 Duo, Core 2
Extreme, Quad Core, and AMD 64 X2, Phenom Quad Core based systems
- Support up
to 4 S-ATA devices
- 2 dedicated
case fan control connectors
- NVIDIA® SLI Certified
Manufactured
with lead-free high density flush
mount SMT components on double-layer
PCB. Advanced engineering keeps the size intact to standard ATX
dimensions: 150(W)
x 86(H) x 140(D) mm
|
|
|
SLITM
Certified |
ATI Certified
|
|
4x
S-ATA
|
Special Features
- Patented
built-in real-time system power consumption monitor
- Power consumption monitor is
essentially a wattage meter built-in which eliminates the
power supply wattage requirement
guesswork. User can now visualize how much power in watts is being consumed operating the system; and
therefore, how much power reserve this power supply is capable of
supporting additional devices (subtract the wattage in display by 560
watts).
This
meter takes out the fear of overloading your power supply when you are
in need of installing additional devices to your
system. For example, if the maximum system power
consumption is shown to be 150w, then you would have additional 410w of
reserve power to accomodate additional video cards or drives.
Also, you would have an idea how costly it is to operate the system
24/7.
People
currently buy higher wattage power supply than they need because:
We just don't know how much wattage our
systems need exactly from a power supply. A lot of power supplies in the market
are over-rated in wattage claim that users feel that they never seem to
get a powerful enough power supply.
System
Administrators, Technicians, Engineers, and PC builders:
No
more guess work on how strong of a power supply you would need for any
system. You can use this unit to gauge the maximum system
wattage requirement first, then install an appropriate lower cost lower
wattage power supply for the system. You no longer have to
over-supply each and every system.
Disclaimer: We recommend using
a lower cost HIGH POWER® models in this method of appropriating
the right power supply wattage for each system as all models from HIGH POWER®
are accurately rated. Use of many cheap over-rated power supply
models that are currently flooding the market may return disappointing
result.
-
Advanced
Double Forward circuit design and double-layer PCB
manufacturing with flush mount SMT components. The result
is a high
efficency (over 80%) power supply with improved reliablity,
reduced
heat-dissipation, more energy-efficient, and longer-lasting. --
Ideal for critical 24/7 data center server application where 40%* of the operational spending is on power.
-
*According to Information Week's Dec 4, 2006 issue on Hewlett-Packard data center cooling & power strategy
|
RoHS Compliant - made with hazardous-free components
RoHS
is the Restriction Of the use of certain Hazardous Substances in
electrical and electronic equipment. This has been a standard in Europe
and is now becoming a standard in the world. Not only lead, but cadium,
mercury, hexavalent chromium, polybrominated biphenyl (PBB), and
polybrominated diphenyl ether (PBDE) flame retardants are limited as well. |
Comprehensive support for
ATX, BTX, and EPS12V form factors
- electrically & mechanically
|
NVIDIA® SLI Ready
ATI Radeon® Crossfire Ready
Support
Intel Xeon, Pentium D, Extreme Edition, Core 2 Quad, Core 2 Duo, Core 2
Extreme, Quad Core, and AMD 64 X2, Phenom Quad Core based systems
|
- ACTIVE PFC for reduced
harmonic distortion
- Full range AC input with automatic AC
input voltage selection
- Triple +12V Output Rails - Three
independent + 12V output rails ensure safe and stable operation under
heavy operation.
- Support Xeon, Pentium D, and AMD 64 X2
Processor Based System
- Integrated
case fan controller built-in
- All
new complete 6*Startm
protection system:
* Over Voltage
Protection
* Under Voltage Protection
* Over Current Protection
* Over Temperature Protection
* Short Circuit Protection
* Over Power Protection
- All cables come pre-sleeved
- Gold coated terminal connectors
Large
quiet 12cm with twin ball bearing fan for an ultimate balance of low
noise and vital reliability. Internal electronic
components migrated to flush surface mount SMT parts
for improved air flow.
Noise Test Report (under 25 degree C ambient temperature)
Performed by an independent test lab unaffiliated with HIGH
POWER®
DC OUTPUT
|
FAN SPEED
|
NOISE LEVEL
|
112 Watts
|
727 RPM
|
20.5 dBA
|
280 Watts
|
1580 RPM
|
25 dBA
|
500 Watts
|
1605 RPM
|
33 dBA |
560 Watts
|
1606 RPM
|
35 dBA
|
- Patented EZ-Extract (squeeze-and-pull) Peripheral Power Connectors
- Dimensions:
150(W) x 86(H) x 140(D) mm
|
AC INPUT
|
115V 60Hz / 230V 50Hz Auto-Selection
|
DC OUTPUT
|
+3.3V
|
+5V
|
+12V1
|
+12V2
|
+12V3 |
-12V
|
+5VSB
|
560W
|
Continuous
Combined
Watts
|
28A
|
30A
|
14A
|
23A
|
15A |
0.5A
|
2.5A
|
5V & 3.3V combined max. output - 180W
12V 3-rails combined max. output - 440W
|
|
DIMENSIONS:
150(W) x 86(H) x 140(D) mm
Packaging (Full
Shrink-wrapped Retail Package)
- 6-foot UL
certified safety power cord
- Installation
screws
- User manual with
installation and trouble shooting guide
- HPC-560-A12S
power supply unit in protective plastic
Standard ATX Main Connector Pin-Out
Pin |
Signal |
Wire Color |
Pin |
Signal |
Wire Color |
1 |
+3.3V |
Orange |
13 |
+3.3V
|
Orange
|
2 |
+3.3V |
Orange |
14 |
-12V |
Blue |
3 |
COM (GND) |
Black |
15 |
COM (GND) |
Black |
4 |
+5V |
Red |
16 |
Power On |
Green |
5 |
COM (GND) |
Black |
17 |
COM (GND) |
Black |
6 |
+5V |
Red |
18 |
COM (GND) |
Black |
7 |
COM (GND) |
Black |
19 |
COM (GND) |
Black |
8 |
Power Good |
Gray |
20 |
N/C
|
N/C |
9 |
+5 V Standby |
Purple |
21 |
+5V |
Red |
10 |
+12V1 |
Yellow |
22 |
+5V |
Red |
11 |
+12V1 |
Yellow |
23 |
+5V |
Red |
12 |
+3.3V |
Orange |
24 |
COM (GND) |
Black |
S-ATA Power Connector Pin-Out
Pin |
Signal |
Wire Color |
1 |
+3.3V |
Orange |
2 |
COM (GND) |
Black |
3 |
+5V |
Red |
4 |
COM (GND) |
Black |
5 |
+12V2 |
Yellow |
Peripheral Connector (a.k.a. Big 4pin) Pin-Out
Pin |
Signal |
Wire Color |
1 |
+12V3 |
Yellow |
2 |
COM (GND) |
Black |
3 |
COM (GND) |
Black |
4 |
+5V |
Red |
Floppy Connector Pin-Out
Pin |
Signal |
Wire Color |
1 |
+12V3 |
Yellow |
2 |
COM (GND) |
Black |
3 |
COM (GND) |
Black |
4 |
+5V |
Red |
PCI-Express Connector PP
Pin-Out
Pin |
Signal |
Wire Color |
1 |
+12V1 |
Yellow |
2 |
+12V1 |
Yellow |
3 |
+12V1 |
Yellow |
4 |
COM (GND)
|
Black
|
5 |
COM (GND) |
Black |
6
|
COM (GND) |
Black |
PCI-Express Connector PQ
Pin-Out
Pin |
Signal |
Wire Color |
1 |
+12V2 |
Yellow |
2 |
+12V2 |
Yellow |
3 |
+12V2 |
Yellow |
4 |
COM (GND)
|
Black
|
5 |
COM (GND) |
Black |
6
|
COM (GND) |
Black |
+12V Connector (4 pin)
Pin |
Signal |
Wire Color |
1 |
COM (GND) |
Black |
2 |
COM (GND) |
Black |
3 |
+12V2 |
Yellow |
4 |
+12V2
|
Yellow
|
+12V Connector (4+4 pin)
Pin |
Signal |
Wire Color |
1 |
COM (GND) |
Black |
2 |
COM (GND) |
Black |
3 |
COM (GND) |
Black |
4 |
COM (GND) |
Black |
5 |
+12V1 |
Yellow |
6 |
+12V1 |
Yellow |
7 |
+12V2 |
Yellow |
8 |
+12V2 |
Yellow |
Compatable with ATX, ATX12V, BTX, and EPS12V Form Factor Motherboards
Compatible with ALL PC motherboards:
Intel P4 socket 478 / P4 LGA775 Core 2 Quad, Core 2 Duo, and Core 2 Extreme motherboard.
AMD Athlon XP/AMD Athlon 64 AM2 / Phenom Quad Core/ socket 426/754/939/940/ Opteron 2000 series motherboards.
Intel® Xeon® Processor Boards.
New! 550W High Efficiency Upgrade (without Power Watcher) -- Available
This web site is powered by
100% wind energy
|
|
HIGH POWER® is committed to quality & longevity
Copyright © 2006-2021 HIGH POWER® All rights reserved. |